Leer esta página en español · Ler esta página em português
HomeFlow now handles heating and air conditioning on Marco Island, from Deltona-era canal homes and new elevated rebuilds to the condo towers along Crescent Beach.
HVAC Services on Marco Island
Canal Homes
AC repair, heat pumps, ductwork and replacements for single-family homes on the canals.
Condos
Closet air handlers, balcony and rooftop condensers, and drain lines in island condo buildings.
Commercial
Rooftop units, kitchen exhaust, refrigeration and maintenance for island businesses.
Elevated Builds
Load calculations, duct design and raised equipment for new homes on the island.
Air conditioning on an island that does things its own way
Marco Island sits at the bottom of Collier County with the Gulf on one side and bays and mangroves on the rest. That location is why people live here, and it is also why air conditioning equipment on the island has a harder life than the same unit would have in Naples. Salt rides in on the breeze every day. Storm surge has reached garages and ground floors twice in recent memory. And a big share of the homes and condos sit closed up for months at a time while the owners are up north.
HomeFlow, the plumbing company many island owners already know, now handles heating and air conditioning too. We repair and replace central air conditioners and heat pumps, service air handlers, install ductless mini-splits, fix and seal ductwork, set up thermostats and humidity controls, and clear the condensate drains that cause so many ceiling stains. On the commercial side we work on rooftop units, split systems, kitchen exhaust and make-up air, and refrigeration for restaurants and shops.
Tell us whether the property is a house or a condo, who manages the building and whether anyone will be there to let us in. Call (239) 518-4198 or use our service request form and we will set up the visit.
What salt air does to outdoor units
The outdoor condenser is a big metal box full of thin aluminum fins and copper tubing, and it pulls a huge volume of air across them every hour it runs. On Marco that air carries salt. Over a few seasons the fins turn white and powdery, then start to flake away. The coil loses its ability to shed heat, head pressure climbs, the compressor works harder and the electric bill creeps up even though nothing seems broken.
Homes near the beach and on the open bays see this fastest, but canal homes deeper in the island are not immune. We regularly see these salt-related failures:
- Fin corrosion that blocks airflow through the condenser coil
- Pinhole refrigerant leaks in the coil where corrosion eats through the tubing
- Rusted cabinet screws, panels and base pans
- Corroded electrical terminals, contactors and disconnect boxes
- Fan motors that seize after their bearings and shafts rust
- Steel tie-down straps and brackets that rust through and stop holding the unit
Choosing equipment for the coast
When we replace a condenser on the island, we talk about coastal options before we order. Some manufacturers offer coil coatings or corrosion-resistant coil designs, and some coatings can be applied after installation. We use stainless or coated fasteners and hardware where they are exposed, and we position the unit so it is not sitting directly in the spray path off the water when there is a choice.
Deltona-era canal homes and their ductwork
Most of the island’s street grid and canals date to the 1960s, when the Deltona Corporation started building, and a long run of canal-front ranch homes followed after the Jolley Bridge opened in 1969. Many of those houses are still here. Some have been remodeled top to bottom. Others still have the same duct layout they were built with, even if the equipment has been swapped three or four times.
What we usually find in the older houses
- An air handler in the garage or in a utility closet off the garage, often sitting low on the slab
- Ducts in a hot, low attic, sometimes original duct board with tape that gave up years ago
- A single central return that starves the bedrooms at the far end of the house
- Rooms added on later, like Florida rooms or enclosed lanais, that were tied into ducts never sized for them
- Equipment still running on R-22 refrigerant
These homes respond well to fixing the basics: sealing or replacing leaky ducts, adding a return to the back bedrooms, and raising the air handler. For an add-on room that never cools, a ductless mini-split is often the cleanest answer.
Repair or replace
When a canal home’s system stops cooling, the cause might be a capacitor, a contactor, a refrigerant leak, a frozen coil or a tripped float switch. We find the cause first, then lay out the cost of repair against the age and condition of the system. A system on R-22 with a leaking coil is usually at the end of the road, because R-22 has not been produced in the United States since 2020 and what is left is scarce. A five-year-old heat pump with a bad capacitor is a quick fix. We give you both sides and you make the call.
Elevated rebuilds and equipment above the flood line
Hurricane Irma made landfall on Marco in September 2017, and Hurricane Ian pushed a storm surge of roughly eight feet onto the island in September 2022. Ian was the one that wrecked air conditioning equipment. Condensers on ground pads, air handlers on garage slabs and duct runs in flooded ground floors were ruined in a few hours of salt water.
Since then, a lot of original ground-level homes have come down and elevated houses have gone up in their place. Some owners rebuild by choice. Others are pushed by the flood program’s substantial damage rule, which requires a flood-zone home damaged or improved past 50 percent of its value to meet current floodplain standards. Either way, the HVAC layout changes.
How HVAC works in a raised home
- Condensers sit on elevated platforms or wall brackets above the design flood elevation
- Air handlers go in conditioned closets or attics on the living level, not in the garage below
- Refrigerant lines run longer between the platform and the air handler, so they need proper sizing and insulation
- Platforms and stands are anchored for wind, which Florida code requires for outdoor units
- Condensate drains are routed so they still drain by gravity from the higher equipment
Condo towers along Crescent Beach
The west side of the island is lined with mid-rise and high-rise condominiums. HVAC in these buildings follows the same split as everything else in a condo: the association handles the common elements and the unit owner usually handles the equipment that serves only their unit. In most buildings that means the owner is responsible for their own air handler, condenser and ducts. Every set of condo documents draws the line a little differently, so we ask to see them before we quote.
Where the equipment lives
Unit air handlers usually sit in a small closet in the middle of the unit, with a return grille in the hallway and tight space to work. Condensers may be on a balcony, on a mechanical deck or up on the roof, depending on the building. Some larger buildings use other setups, like water-cooled equipment served by a central loop. Replacing a rooftop condenser can mean coordinating a crane lift and roof access with management, and balcony units often have strict size and placement limits.
Building rules we plan around
- Association approval before the work or the city permit
- Certificates of insurance on file with the building
- Elevator reservations and protection pads for equipment and old units
- Work hours, and limits on noisy work during season
- Requirements for float switches, secondary pans or leak sensors on air handlers
Those rules exist because a clogged condensate drain in a tower sends water through the floor into the unit below. We flush drain lines and test the float switch on every condo service call.
Seasonal homes closed up for the summer
The island’s population more than doubles in winter, and plenty of homes and condos sit empty from late spring into the fall. That is exactly when the air conditioner matters most, because a closed house on Marco in August is hot, humid and full of things that mold likes to grow on.
Turning the AC off when you leave is the most expensive mistake we see. Within a few weeks the humidity climbs, cabinets swell, closets go musty and mold starts on walls and fabric. Setting the thermostat very low wastes power and can leave the house cold and damp because the system short cycles.
What we recommend before you head north
- Leave the system running with the thermostat around 78 to 82 degrees, or use a humidity setting if your thermostat has one
- Install a fresh filter and have the drain line flushed and the float switch tested
- Ask about a Wi-Fi thermostat that sends alerts for high temperature or humidity
- Consider a whole-home dehumidifier for houses that stay damp with the AC running
- Have a neighbor, manager or service check the home every couple of weeks
- Turn off power to the condenser only if a storm is expected to flood the area
Humidity and the air inside a closed house
Removing moisture is half of what an air conditioner does on the island. A properly sized system runs long enough to pull water out of the air and send it down the drain. An oversized system cools the house fast, shuts off and leaves the air sticky. We see a lot of oversized equipment, usually because someone matched the old tonnage or added a ton to be safe.
Signs the house is holding too much moisture include condensation on supply grilles, a musty smell when you open closets, mildew on shoes and leather, and floors that feel tacky. The fix might be resizing the system at replacement, slowing the fan speed, sealing return ducts that pull damp attic or garage air, or adding a whole-home dehumidifier.
Indoor air quality options
- The right filter for your equipment, changed on schedule
- Media filter cabinets for better filtration without choking airflow
- UV lights at the coil to cut down on mold and slime growth
- Energy recovery ventilators to bring in fresh air without loading the house with humidity
- Coil and blower cleaning for systems that have been running dirty
Heat pumps, strip heat and the cool mornings
Marco gets only a handful of chilly mornings in a typical winter, usually when a front comes through between December and February. Most island homes heat with a heat pump, which is the same outdoor unit running in reverse, backed up by electric heat strips in the air handler. Some older homes have a straight air conditioner with heat strips only.
The first time the heat comes on each year, a dusty smell is normal and fades fast. A burning smell that keeps going, a breaker that trips, or heat that never warms the house is worth a call. We service reversing valves, defrost controls, heat strips and sequencers.
Ductless systems for lanais, garages and odd spaces
Ductless mini-splits solve a lot of island problems. An enclosed lanai that bakes in the afternoon sun, a garage workshop, an office over the garage, or a room added decades after the house was built can all get their own cooling without being forced onto the main duct system.
A mini-split has a small outdoor unit and one or more wall, ceiling or ducted indoor heads. Each head has its own control, so you cool the space only when you are using it. Multi-zone systems can serve several rooms from one outdoor unit. On Marco we pay attention to where the outdoor unit goes, how it is mounted and how the line set is protected, because salt air treats those the same as any other condenser.
Commercial HVAC for island businesses
Commercial work on Marco ranges from shops, offices and restaurants along Collier Boulevard and in the island’s plazas to resorts, marinas and condo association common areas. Coastal exposure makes commercial equipment age faster too, and a rooftop unit on a building near the water can corrode well ahead of its expected life.
What we handle
- Rooftop units and packaged equipment: repair, replacement and crane coordination
- Split systems and ductless or VRF systems for offices and multi-tenant spaces
- Make-up air and kitchen exhaust for restaurants
- Walk-in coolers, reach-in units and ice machines in restaurants and bars
- Cooling for server, phone and electrical rooms that cannot go down
- HVAC for tenant buildouts and space reconfigurations
- Building controls and scheduling for clubhouses and amenity buildings
Larger resort and tower buildings may run on chillers, cooling towers or central water loops. We work on the equipment we are set up for and bring in the right specialists for large central plants, so a property manager has one call to make.
Preventive maintenance agreements
Season is short and it is when island businesses make their money. A restaurant that loses its walk-in or its dining room cooling on a February Saturday loses more than a repair bill. We set up maintenance agreements by property with coil cleaning, drain service, belt and filter changes and inspection notes for each unit, so problems show up in the off season and not in the middle of the rush.
New construction and major remodels
For new homes and full remodels, we handle HVAC from design to final inspection. That starts with a Manual J load calculation based on the actual house: its windows, its orientation to the water and the afternoon sun, its insulation and its ceiling heights. Big glass walls facing the Gulf or a bay change the load a lot, and they are one of the main reasons we do not size by square footage.
- Load calculations and equipment selection
- Duct design so each room gets the air it needs
- Rough-in coordinated with the builder and the other trades
- Equipment set above flood elevation and anchored for wind
- Startup, charging and airflow testing
- Duct leakage testing, which the Florida energy code requires on new construction
Permits go through the City of Marco Island
The island reincorporated as a city in 1997 and runs its own building department. That means mechanical permits for work on Marco are filed with the City of Marco Island, not Collier County. Replacing an air conditioner or heat pump generally needs a mechanical permit, and new construction always does.
Skipping the permit on a changeout can cause trouble later with insurance, a sale or a manufacturer warranty claim, so we pull it as part of the job. In condo buildings, the association’s approval usually has to come first. We coordinate with the building manager so the paperwork lines up before the equipment shows up.
After a storm
After a hurricane or a surge event, do not turn the system back on until someone has looked at it if the condenser or air handler sat in water. Salt water corrodes controls, motors and coils from the inside, and a unit that seems to run fine after drying out often fails weeks later. Flooded ductwork should be replaced, not dried, because it holds moisture and grows mold.
- Turn off power to equipment that took on water
- Look for a condenser that shifted, tipped or lost its tie-downs
- Check for debris in the condenser fins and around the unit
- Photograph damage before cleanup for your insurance claim
- Call to schedule an inspection before restarting flooded equipment
When equipment has to be replaced anyway, that is the time to raise the condenser, move the air handler up and out of the garage, and upgrade the anchoring.
Maintenance plans for island systems
Equipment on Marco needs more attention than inland systems because of salt, humidity and long stretches with nobody home. A maintenance plan puts the visits on a schedule so they actually happen.
- Condenser coil cleaning and a check for corrosion on fins, panels and hardware
- Electrical inspection of capacitors, contactors and terminals
- Condensate drain flush and float switch test
- Filter change and blower and coil inspection
- Refrigerant and airflow check
- Tie-down and stand inspection before hurricane season
When to call us
Call when the house is warm and the system is running, when you find water around the air handler or a fresh stain on the ceiling, when the outdoor unit is humming but the fan is not turning, or when a neighbor downstairs reports a leak from above. Call if you are buying on the island and want to know the age and condition of the system before you close, or if you manage a seasonal home and want it checked before the owners arrive.
Reach us at (239) 518-4198 or through the service request form. Our office hours are Monday through Friday, 8am to 5pm. We work across Lee, Charlotte and Collier Counties, including Naples and Golden Gate on the mainland side.
Common Questions
Do I need a city or county permit to replace my AC on Marco Island?
Marco Island has its own building department, so mechanical permits for AC and heat pump changeouts are filed with the City of Marco Island, not Collier County. In condo buildings you will usually need association approval as well. We handle the permit as part of the job.
Why does my condenser on Marco wear out so fast?
Salt air corrodes the coil fins, tubing, cabinet and electrical parts. Units close to the beach or open water see it fastest. Rinsing the coil with fresh water, annual coil cleaning and coastal-rated equipment or coatings all help it last longer.
Should I turn off my AC when I leave for the summer?
No. A closed-up island home without cooling can grow mold within weeks. Leave the system running around 78 to 82 degrees or on a humidity setting, put in a fresh filter and have the drain line serviced before you leave.
Who is responsible for the air conditioner in my condo?
In most island condo buildings, the unit owner is responsible for the equipment that serves only their unit, including the air handler and condenser, while the association handles common elements. Your condo documents decide it, so check them or let us look.
My equipment was flooded during Hurricane Ian. Can it be saved?
Usually not. Equipment that sat in salt or brackish water tends to fail from internal corrosion even if it runs at first, and wet ductwork should be replaced. If you are replacing, consider raising the condenser and moving the air handler above flood level.
How do I know if my system still uses R-22?
Check the data plate on the outdoor unit for the refrigerant type. Systems installed before about 2010 often use R-22. Since its production ended in 2020, a major leak on an R-22 system usually makes replacement the better choice.
Do you work on restaurant and commercial HVAC on the island?
Yes. We service rooftop units, split and packaged systems, kitchen make-up air and exhaust, walk-in coolers and ductless systems, and we set up preventive maintenance agreements for businesses and associations.
Related Pages
Nearby areas
Plumbing
Need AC service on Marco Island?
Call (239) 518-4198 or send us a request and we will get back to you.
