Plumbing Questions, Answered

Leer esta página en español · Ler esta página em português

These are the plumbing questions we hear most often, grouped by topic, with short answers and links to the pages that go deeper. If yours isn’t here, call us at (239) 518-4198 during office hours or email help@homeflowfl.com.

Scheduling and hours

What are your office hours?

Monday through Friday, 8am to 5pm. That’s when the office phone is answered, when visits get booked, and when most scheduled work happens. You can send the request form on our contact page or email help@homeflowfl.com any time, and we’ll pick it up the next business day. Give us the address, a callback number, and a plain description of what you’re seeing, like “water under the kitchen sink” or “no hot water since Tuesday.” A photo of the problem and of the water heater label helps us bring the right parts on the first trip.

Can I reach you after hours?

For something urgent outside office hours, call (239) 518-4198. We take urgent calls by phone when we can, but we can’t promise someone picks up every night or weekend, so don’t sit and wait if water is spreading. Shut off the main first. In most Southwest Florida houses it’s a ball or gate valve where the line enters the house, often in the garage or near a front hose bib, with a second valve at the meter box by the street. Our shutoff guide shows where to look, and the after-hours page covers what counts as urgent.

What should I have ready before the visit?

A few things save real time once we’re in the door. Clear a path to the problem, the water heater closet and the main shutoff. Know if the house is on city water or a well, and city sewer or septic, because that changes how we diagnose almost everything. Have the year the house was built handy, since it hints at what pipe is in the walls and under the slab. If you’re in a condo, find out the building’s contractor rules and where your unit’s shutoff is before the appointment, not during it.

  • Clear access to the problem area, water heater and main shutoff
  • City water or well? City sewer or septic?
  • Year the home was built and any past repipe or water heater dates
  • Condo or HOA contractor rules, gate codes and parking instructions
  • Photos of the problem and of any equipment labels

Do you take commercial calls too?

Yes. HomeFlow does commercial plumbing along with residential work, including offices, retail, restaurants and multifamily buildings. Commercial jobs usually take more planning up front. Tell us your operating hours, who can let us in, whether the water can be shut off to the whole building or only a section, and whether there’s a property manager or landlord who needs to approve the work. For businesses that can’t close, we’ll talk through how to stage the job so the disruption lands at the least painful time of day.

Service area

Which areas do you serve?

We work across Lee, Charlotte and Collier Counties. In Lee that means Fort Myers, North Fort Myers, Fort Myers Beach, Cape Coral, Lehigh Acres, Estero, Bonita Springs, Sanibel and Alva, plus San Carlos Park, Gateway, Fort Myers Shores and Buckingham, and Pine Island and Matlacha. In Charlotte it’s Punta Gorda, Port Charlotte and the Charlotte County side of Englewood. In Collier it’s Naples, Golden Gate, Marco Island, Immokalee and Ave Maria. The service areas page links to a page for each community with local plumbing notes.

Do you work on the islands?

Yes, Sanibel, Fort Myers Beach, Pine Island and Marco Island are all in our area. Island work takes a little more planning. In season the causeways and bridges back up, so we schedule with traffic in mind. Many homes rebuilt or raised after Hurricane Ian in 2022 sit on pilings with supply and drain lines running exposed under the house, where salt air is hard on metal fittings, hangers and hose bibs. If your home is elevated, tell us when you call so we know what we’re walking into.

Do you serve rural and well-water areas?

We do. Large parts of Lehigh Acres, Alva, North Fort Myers, Immokalee and the outer edges of Golden Gate are on private wells and septic instead of city utilities. That changes the work. A pressure complaint on a well might be a failing pressure switch, a waterlogged tank or a pump, not a pipe. Sulfur smell and orange staining point at the water source more than the plumbing. When you call from one of these areas, tell us you’re on a well so we come ready to check the pump and pressure tank too.

Leaks and slab leaks

How can I tell if I have a hidden leak?

Start with the water meter. Turn off every faucet, the ice maker and the irrigation, then watch the meter. Most have a small triangle or star-shaped leak indicator that spins with even a slow drip. If it’s moving with everything off, water is going somewhere. Next, close the main shutoff at the house. If the meter still moves, the leak is on the line between the meter and the house. If it stops, the leak is inside. That five-minute test tells us where to focus our leak detection and saves you paying for guesswork.

What is a slab leak, and why do we see so many?

Most Southwest Florida homes are built slab-on-grade, with no crawlspace and no basement. In a lot of homes from the 1970s through the 1990s, copper supply lines run under or through that concrete. Over time copper can wear thin and pinhole, especially where it rubs against rebar or gravel or where it bends. Common signs are a warm spot on the tile from a hot line, the sound of running water with everything off, a damp patch in carpet, a cracked floor tile, or a water bill that jumps for no obvious reason.

Do you have to break up my floor to fix a slab leak?

Not always. There are three common fixes. A spot repair means opening the slab right over the leak, fixing it and patching the concrete. A reroute abandons the leaking line under the slab and runs a new one through the attic and walls, which avoids the floor entirely. A repipe replaces the whole system when the copper is failing in more than one place. Which one makes sense depends on the pipe’s condition, where the leak is and what flooring is on top. Our slab leak repair page goes through the tradeoffs.

A pipe just burst. What do I do first?

Close the main shutoff. Then open the lowest faucet in the house, usually a tub or a hose bib, to drain pressure off the lines. Turn off the water heater, at the breaker for electric or the gas valve set to off or pilot. If water is near outlets or the panel, keep clear and kill power to that area at the breaker. Take photos and video before you clean up, since your insurer will want them. Then call us at (239) 518-4198 and tell us what failed and where.

Water heaters

How long does a water heater last here?

Tank water heaters are commonly expected to last somewhere around 8 to 12 years, and hard water or heavy sediment pulls that toward the low end. To find your heater’s age, check the data plate on the side. Most manufacturers encode the build year and month in the serial number. Rust at the base, popping or rumbling while it heats, rusty hot water and moisture in the pan are the usual warning signs. If yours is near the end of that range, it’s worth planning a water heater replacement before it fails in the closet.

Should I go tank or tankless with our water?

Both work here, but water hardness matters more than most people expect. A tankless unit heats water through a small heat exchanger, and scale builds up in it fast on hard well water. Most manufacturers call for periodic descaling through isolation valves on the unit. Gas tankless units also usually need a larger gas line and new venting, and electric tankless units need serious amperage from your panel. A tank is simpler and cheaper to swap. Our tank vs tankless guide compares them for Southwest Florida water.

Why does only my hot water smell like rotten eggs?

That’s usually the water heater, not the plumbing. Most tank heaters have a magnesium anode rod that corrodes on purpose to protect the tank. When the water has sulfate or sulfur bacteria in it, which is common on private wells here, the rod reacts and produces hydrogen sulfide gas. If the cold side smells fine and only the hot side stinks, that’s the tell. The fix is often swapping to an aluminum-zinc or powered anode, flushing the tank, and dealing with the water source if the cold water smells too.

Does replacing a water heater need a permit?

In most Florida jurisdictions, yes. Replacing a water heater generally requires a plumbing permit and an inspection through the local building department, whether that’s Lee County, Cape Coral, Fort Myers, Collier, Naples or Charlotte County. The inspector typically looks at the temperature and pressure relief valve and its discharge line, the drain pan where one is required, the electrical or gas connection, venting on gas units, and an expansion tank where the system calls for one. Skipping the permit can cause problems later when you sell or file an insurance claim.

Drains and sewer

Why does my toilet gurgle when the washer drains?

When one fixture affects another, the problem is usually downstream of both, in the main drain line. A washing machine dumps a lot of water fast, and if the main is partly blocked, that water pushes air back up through the nearest toilet. Other signs are water coming up in a tub when the toilet flushes or several drains slowing at once. A plunger won’t fix it. The main needs to be cleared from a cleanout, which is usually a capped pipe outside near the house. See our page on clogged toilets and main lines.

Snake or hydro jetting: which one do I need?

A cable machine, the snake, punches through a clog and is the right first step for most single-fixture stoppages. Hydro jetting uses high-pressure water to scour grease, soap buildup and fine roots off the inside of the pipe, so it’s better for lines that keep clogging. Jetting isn’t the answer for every pipe. On cracked or badly corroded lines it can make damage worse, so on older systems we like to look with a camera first. Our drain cleaning page explains how we decide.

Do you do sewer camera inspections?

Yes. We run a camera down the line from a cleanout and watch the pipe in real time. It shows root intrusion at joints, offset or separated joints, bellies where the pipe has sagged and holds water, scale in cast iron, and breaks. It’s the most useful tool before buying an older house, before jetting, and after repeated backups. You see what we see, and we can note the distance and depth of a problem so a repair targets one spot instead of the whole yard. More on our sewer camera inspection page.

My house has cast iron drains. Should I worry?

Many homes in Fort Myers and Cape Coral built before the mid-1970s have cast iron drain lines, and lots of them sit under the slab. Cast iron tends to rot from the inside, and the bottom of the pipe wears thin first where water and waste run. That’s sometimes called channel rot. Watch for slow drains that come back after clearing, sewer smell inside, and recurring backups. A camera inspection tells you how far along it is. Our cast iron drain guide covers repair and replacement options.

Repiping and old pipe

How do I find out what pipe I have?

Look where pipes are exposed: at the water heater, under the kitchen and bathroom sinks, behind the toilet and at the main shutoff. Gray flexible plastic, often stamped PB2110, is polybutylene, used in homes built roughly from 1978 to 1995. Cream or tan rigid plastic is CPVC. Red, blue or white flexible tubing is PEX. Shiny or dull brown metal is copper. Dull gray threaded metal pipe in an older house is galvanized steel. The age of the house narrows it down, but remodels mix materials, so check more than one spot.

My insurance company says I need to replace polybutylene. Why?

Florida insurers often require a 4-point inspection on older homes, covering the roof, electrical, plumbing and HVAC. Polybutylene has a long history of failing without warning, and many carriers won’t write or renew a policy on a home that still has it. The same goes for some older galvanized systems. If you’re buying or renewing and the inspector flags it, you’ll usually need the pipe replaced before coverage goes through. Our polybutylene and 4-point guide explains what inspectors look for.

PEX or copper for a repipe?

Both meet code and both are used here. PEX is flexible, so it runs through attics and walls with fewer fittings, which means fewer joints that can leak. It also handles water chemistry well. It does need to stay out of direct sunlight. Copper has a long track record and holds up to heat, but it costs more and can pinhole over time, especially with aggressive water. Most repipes in this area today are PEX. Our PEX vs copper guide gets into the details.

How disruptive is a whole-house repipe?

Less than most people expect. On a typical slab home here, the new lines run through the attic and drop down inside the walls to each fixture, so the slab stays untouched. We cut small openings in drywall where the lines come down and connect, then those openings get patched. Water is off while we work and back on at the end of each working day in most cases. How long it takes depends on the size of the house and the number of bathrooms. See whole-house repiping for how a job runs.

Water quality

Is the water hard where I live?

It depends on where your water comes from, not just your city. Cape Coral treats its city water with reverse osmosis, which produces soft water that can be slightly aggressive toward metal pipe. Private wells in Lehigh Acres, Alva, North Fort Myers and other areas draw from limestone aquifers and often run hard, sometimes with iron or sulfur. Other utilities around the region treat their water differently, so results vary block to block. Our Cape Coral water quality guide covers that system, and similar guides cover Fort Myers and Naples.

Do I need a softener, a filter, or both?

They do different jobs. A water softener uses ion exchange to swap out calcium and magnesium, which stops scale. It doesn’t remove chlorine or chloramine, sulfur smell or most iron. A carbon filter handles taste, odor and chlorine. Wells with sulfur or iron often need dedicated treatment ahead of the softener. Start with a water test so you buy what fixes your actual problem, not a bundle you don’t need. Our softeners and filtration page explains the options.

What’s the white crust on my faucets and shower heads?

That’s mineral scale, mostly calcium carbonate, left behind when hard water evaporates. Soaking aerators and shower heads in white vinegar overnight usually dissolves it. If it builds back fast, your water is on the hard side, and the same scale is collecting where you can’t see it: inside the water heater, the tankless heat exchanger, the dishwasher and the fill valves in your toilets. On a well, it’s a good reason to test the water and look at a softener. On city water, check your utility’s annual water quality report.

Septic and sewer conversion

The city says sewer is coming to my street. What do I have to do?

Under Florida law, once a public sewer becomes available, owners are generally required to connect within 365 days of being notified, and some local rules set their own deadlines. The private side is on you: a new sewer lateral from the house to the utility’s connection point, plus abandoning the old septic tank by having it pumped and then removed or crushed and filled, all under permit. In Cape Coral this comes through the Utilities Extension Project. Our septic to sewer conversion page walks through the steps.

How does the Cape Coral UEP hookup work?

Cape Coral’s Utilities Extension Project brings city water, sewer and irrigation lines into neighborhoods that were built on wells and septic. The city installs the mains and the connection point at the property, and owners are assessed for the project. Connecting the house to that point, and dealing with the old septic tank and sometimes the old well, is the owner’s job and needs a contractor and permits. Timing and requirements depend on your area’s phase. Our UEP hookup guide covers what to expect.

How do I know if my septic system is failing?

Watch for slow drains throughout the house, not just one fixture, plus gurgling, sewage smell in the yard, and soggy or unusually green patches over the drainfield. Water backing up in the lowest drain, often a shower, is another sign. The EPA’s general guidance is to have a septic tank inspected and pumped every three to five years. Since July 2021, septic programs in Florida are overseen by the Department of Environmental Protection. A septic company pumps the tank. We handle the plumbing between the house and the tank.

Condos and rentals

In a condo, who pays for a plumbing leak?

It depends on your association’s declaration, so read it before you assume. A common split is that fixtures and the lines serving only your unit belong to the unit owner, while shared risers and stacks belong to the association. Water from your unit that damages the unit below can also become an insurance question between both owners. Florida’s condominium law sets the framework, but the declaration fills in the details. Our condo plumbing guide covers how those lines usually get drawn.

What does a condo building usually need from a plumber?

Most associations want a certificate of insurance before a contractor works in the building, and HomeFlow is insured, so ask your manager what paperwork they need and send it our way early. Many buildings restrict work hours, require booking the service elevator and need notice before any riser shutoff that affects other units. If your unit has its own shutoff, know where it is. In many mid-rise buildings it’s in a utility closet or above a ceiling panel. Getting those answers before the visit keeps it from stalling at the front desk.

Do you work with landlords and property managers?

Yes. Florida law requires landlords to keep plumbing in reasonable working condition, so rental calls tend to come with a clock attached. For managed properties, tell us who approves work and up to what limit, how to reach the tenant, and any lockbox or access details. We’ll report what we found and what we did so you can document it. Our property managers and HOA page explains how we handle multi-unit and managed accounts.

I’m a seasonal owner. How should I leave the plumbing?

Close the main shutoff, or the unit shutoff in a condo, before you leave. Set the water heater to vacation mode or turn it off at the breaker. Leave the AC running at a reasonable setting so humidity stays down. Pour a little water in rarely used drains so the traps don’t dry out and let sewer gas in. Ask a neighbor or manager to check for leaks, especially after storms. If you have irrigation on a separate line, decide whether it needs to stay on while you’re away.

Permits and inspections

Which plumbing jobs need a permit?

Rules vary by jurisdiction, and the table below is a general guide, not a ruling for your address. As a rule of thumb, replacing or relocating anything that’s part of the supply, drain, gas or water heating system needs a permit, while swapping like-for-like parts on a fixture usually doesn’t. Your local building department, whether that’s Lee County, Cape Coral, Fort Myers, Bonita Springs, Collier, Naples or Charlotte County, has the final word.

Who pulls the permit, me or the plumber?

Normally the contractor pulls it, and that contractor is on record as responsible for the work passing inspection. Florida does allow an owner-builder exemption for work on your own home, but the owner then has to do the work personally or directly supervise it, and takes on the responsibility that comes with it. If anyone asks you to pull a permit in your name for work they’re doing, that’s a red flag. Keep the final inspection record. Buyers, appraisers and insurers may ask for it later.

JobPermit usually needed?Notes
Water heater replacementYesInspection of relief valve, pan, venting and connections
Whole-house repipeYesPressure test before walls are closed
Sewer connection or septic abandonmentYesCommon with Cape Coral UEP and other conversions
New gas line or appliance hookupYesPressure test; call 811 before digging
Moving or adding fixtures in a remodelYesOften part of the remodel permit
Faucet cartridge, toilet flapper or fill valveUsually noLike-for-like repair parts
Clearing a clogged drainNoNo change to the system

What’s involved with gas line work?

Gas piping needs a permit, and new or modified lines are pressure tested before they’re put into service. If the job involves digging, Florida law requires calling Sunshine 811 before you break ground so buried utilities get marked, and you need to wait the required two full business days. Common gas jobs here are lines for tankless water heaters, ranges, dryers, pool heaters and outdoor kitchens. If you smell gas, leave the house and call the gas utility from outside. Our gas line page has more.

Why did my utility send a backflow testing notice?

Backflow preventers stop water from irrigation, fire lines or commercial equipment from being pulled back into the public supply. Utilities in this region generally require each assembly to be tested every year, with results filed by a certified tester, and they’ll send notices or penalties if the test isn’t on record. Irrigation systems are the most common reason homeowners get these letters. Commercial buildings and restaurants often have several assemblies. Our backflow testing page explains testing and repairs.

Maintenance plan

What is the HomeFlow maintenance plan?

It’s an annual plumbing maintenance plan: a yearly check-up of your plumbing system so small problems get caught before they turn into water damage. We look over the system and tell you what we see. We don’t publish the plan’s details online, so call (239) 518-4198 or read our maintenance plan page and get in touch to ask what’s included for your property. Homeowners, landlords and small commercial properties can all ask about it.

Who gets the most out of a yearly check-up?

Owners of older homes with original pipe, people on wells with hard or sulfur water, seasonal residents who are away for months, and landlords who’d rather find a weeping supply line between tenants than after one. Homes with polybutylene, cast iron drains or a water heater past ten years old are good candidates too. A check-up won’t stop every failure, but it gives you a picture of what’s aging so you can plan replacements on your schedule instead of after a leak.

What can I do myself between visits?

Know where your main shutoff is and make sure it turns. Check under sinks and around the water heater a few times a year for drips, staining or soft cabinet floors. Replace washing machine hoses with braided stainless ones if yours are old rubber. Look at the meter leak indicator once in a while with everything off. Before hurricane season, add plumbing to your storm plan, especially if you’re on a well that needs a generator to run. Our hurricane plumbing checklist lists what to do before and after a storm.

Common Questions

What are HomeFlow’s office hours?

Monday through Friday, 8am to 5pm. Outside those hours we take urgent calls at (239) 518-4198 when we can, but we can’t promise every call gets answered at night or on weekends. If water is spreading, shut off the main first. You can also use the request form on our contact page or email help@homeflowfl.com any time.

Where does HomeFlow work?

Lee, Charlotte and Collier Counties, including Fort Myers, Cape Coral, Lehigh Acres, Estero, Bonita Springs, Sanibel, Fort Myers Beach, Punta Gorda, Port Charlotte, Naples, Golden Gate, Marco Island, Immokalee, Ave Maria and the Charlotte County side of Englewood.

How can I check for a hidden leak?

Turn off every fixture and watch the meter’s leak indicator. If it moves, close the main at the house. If the meter keeps moving, the leak is between the meter and the house. If it stops, the leak is inside the house.

Do I need to break my floor to fix a slab leak?

Not always. Options include a spot repair through the slab, a reroute that abandons the line under the slab and runs a new one through the attic and walls, or a full repipe if the copper is failing in several places.

Why does only my hot water smell like rotten eggs?

Usually the water heater’s magnesium anode rod is reacting with sulfate or sulfur bacteria in the water, which is common on wells. Swapping to an aluminum-zinc or powered anode and flushing the tank often fixes it.

Why does my insurer want polybutylene replaced?

Florida insurers often require a 4-point inspection on older homes, and many won’t write or renew a policy on a house that still has polybutylene pipe, which was used in homes built roughly from 1978 to 1995.

How soon do I have to connect when sewer becomes available?

Florida law generally requires connection within 365 days of notice that public sewer is available, and local rules can set their own deadlines. The old septic tank must be pumped and abandoned under permit.

Does a water heater replacement need a permit?

In most Florida jurisdictions, yes. The local building department typically inspects the relief valve and discharge line, the drain pan, the gas or electric connection, venting on gas units and an expansion tank where required.

Need a plumber?

Call (239) 518-4198 or send us a request and we’ll get back to you.

Scroll to Top