Repiping for Home Insurance in Florida: What Insurers Want

Leer esta página en español · Ler esta página em português

Florida insurers read the plumbing page of your 4-point closely, and polybutylene, galvanized pipe, old cast iron drains and aging water heaters are the items most likely to stop a policy. This page explains what carriers look for, what proof helps a repipe clear underwriting, and how to time the work around a closing. Call HomeFlow Plumbing at (239) 518-4198 to plan a repipe your agent can work with.

Why insurers care about pipes more than most buyers do

Non-weather water losses are one of the most common homeowners claims in Florida, and many of them start with a supply line, a fitting or a water heater. Underwriters cannot see inside your walls, so they rely on two things: the age of the house and a short inspection report that lists what the plumbing is made of. If that report shows a pipe material the carrier does not like, the application can be declined, written with a water damage exclusion, or held until the problem is fixed.

This page is about that paperwork side of repiping. For the work itself, see whole-house repiping. Here we focus on what the insurer reads, what it tends to reject, and how to plan a repipe so the result actually clears underwriting.

One ground rule before anything else. We are plumbers, not insurance agents or lawyers. Underwriting rules change, and every carrier writes its own. Treat everything below as background, then confirm the specifics with your agent before you spend money.

The 4-point lines that decide a repipe file

The full list of what the plumbing section checks is on our polybutylene and 4-point guide. For a repipe, three parts of the current Citizens form (the sample we reviewed is labeled Insp4pt 03 25) carry most of the weight.

  • Supply and drain ages are asked separately. Each gets its own original, completely re-piped or partially re-piped box. A new PEX supply system does not cover old cast iron drains, and the form makes that visible.
  • The comments must give the year and extent of the work. A checked box with no comment invites a follow-up question from the underwriter. Make sure the inspector has your permit and invoice so the comment can be specific.
  • Signatures are trade-limited. The form must be signed by a Florida-licensed inspector, and Citizens allows a licensed trade professional to sign only the section for their own trade. Most homeowners use a home inspector or general contractor for the whole form.

The form also says it is used only to judge insurability and is not a warranty of the home’s condition. A clean 4-point helps you get a policy. It does not tell you how long the pipes will last.

How pipe material and age get judged

The form records facts. The carrier decides what those facts mean. Here is how each common material in Southwest Florida homes tends to be treated, based on published carrier guidelines we reviewed. Individual carriers differ, so use this as a map, not a rulebook.

Material on the reportCommon insurer treatmentWhat usually resolves it
Polybutylene (gray flexible supply)Citizens: not insurable for new business on homes over 20 years old. Some private carriers decline; others write with a water damage exclusion.Full replacement of all polybutylene, documented
Galvanized steel supplySome carriers list it as ineligible; others accept with a water damage exclusionReplacement of the galvanized runs, including short sections at fixtures
CopperGenerally accepted if no active leaks or heavy corrosionRepair of any leaks noted on the report
CPVC or PEXGenerally accepted; one carrier guideline we reviewed accepts PEX regardless of ageUsually nothing, if condition is satisfactory
Cast iron drainsNow recorded on the current form; treatment varies, often tied to age and conditionCamera footage, repair, lining or replacement depending on the carrier
PVC or ABS drainsGenerally acceptedUsually nothing

Age matters alongside material. The form asks whether the system is original. A 1985 house with original piping reads differently from a 1985 house that was fully repiped in 2021, even though the house age is the same. That one checkbox, plus the comment explaining it, is often what moves a file forward.

Citizens rules in plain terms

Citizens is the state-created insurer, and its rules often set the floor that buyers run into when private carriers decline. A few points from its published guidance:

  • Citizens states that a 4-point inspection is required for properties more than 20 years old.
  • Under eligibility rules effective for new business on or after February 1, 2022, homes over 20 years old with polybutylene piping are not insurable by Citizens.
  • Its home condition requirements list unrepaired water damage, signs of leaks, and plumbing not in good working order as problems that must be fixed first.
  • Its condition rules have flagged a water heater inside the finished living area whose relief valve is not piped to limit water damage.
  • Its earlier home condition document said 4-point inspections used for condition must be dated within 12 months of the application. Other carriers set shorter windows, and the state consumer advocate’s guide says reports are often expected within 30 days. Ask your agent which window applies.

Citizens also asks that serious hazards be fixed before you apply, not after. That timing point drives most of the planning advice later on this page.

What other Florida carriers commonly require

Private carriers publish underwriting guides for their agents, and the plumbing rules repeat across many of them. These are patterns from guides we reviewed, not promises about any company:

  • Polybutylene and galvanized listed as ineligible, or accepted only with a water damage exclusion.
  • Water heaters limited to about 15 years old when installed inside the living space. One guide set no age limit for heaters in a garage.
  • Older homes getting a water damage exclusion automatically. One carrier applies it to HO-3 policies on homes 40 years or older, with an optional limited buy-back.
  • Inspection substitution: a recent 4-point accepted in place of the carrier’s own interior inspection, sometimes with exceptions for homes with no prior coverage.
  • PEX accepted outright in at least one guide, which matters if you are choosing materials.

A water damage exclusion can make a policy cheaper on paper and much weaker in practice. If a carrier offers to write your home with one, ask your agent what the exclusion removes and whether a buy-back is available. Then compare that to the cost of fixing the plumbing so the exclusion is not needed.

What Florida law does and does not say

Florida law has a specific roof rule. Section 627.7011 of the Florida Statutes says an insurer may not refuse to issue or renew a homeowners policy solely because a roof is less than 15 years old. For roofs 15 years or older, the homeowner can have an authorized inspector check the roof, and the insurer may not refuse or nonrenew based on roof age alone if the inspection shows at least 5 years of useful life left.

There is no matching statute for plumbing. The same section does not address pipe material or plumbing age, so carriers still set those rules in their own underwriting guidelines. Bills to expand the roof protections were filed for the 2026 session, including SB 808 and HB 815, and both died in committee in March 2026. We did not find any enacted plumbing-age protection.

The practical takeaway: do not assume a law will stop a carrier from declining polybutylene, galvanized or an old water heater. Plan around the carrier’s rules, and ask your agent whether anything has changed since this page was written.

Documentation that helps a repipe clear underwriting

A repipe that happened but cannot be proven is close to a repipe that never happened. The inspector who fills out the next 4-point has to see the new piping and needs to write the year and extent in the comments. The underwriter may ask for more. Keep a folder with the following:

  • Permit and final inspection. The permit number and a passed final from the building department are the strongest proof that the work was done and inspected.
  • Invoice that names materials. It should list the pipe material installed (PEX, copper or CPVC), state that the repipe was whole-house or describe exactly which areas were done, and confirm what was removed or abandoned.
  • Photos. Before and after shots at the water heater, under sinks, at the main shut-off and at any open wall or attic run.
  • Water heater records. Model, serial number and install date, since the serial number usually encodes the manufacture date.
  • Drain records if relevant. Camera video and the report from any drain repair, lining or replacement.
  • A fresh 4-point dated after the final. An old report showing the old pipe will keep causing problems until it is replaced by a new one.

Give copies to your agent at application time rather than waiting to be asked. If you sell later, the same folder helps the next buyer insure the house.

Partial repipe vs whole house: will insurers accept partial

The 4-point form has a box for partially re-piped, so partial work is a recognized category. Acceptance depends on what is left behind. If any polybutylene or galvanized remains in the supply system, the inspector is supposed to check that box too, and a carrier that rejects the material will usually see it.

When partial can work

  • The original pipe is copper or CPVC in good condition, and you are replacing only a damaged section or a single failing run.
  • A previous owner already replaced most of the polybutylene, and the remaining pieces are short stubs that can be removed completely in a smaller job.
  • The carrier’s concern is limited to one area, such as corroded galvanized nipples at the water heater.

When partial usually fails

  • Polybutylene stays in walls or the attic because it was hard to reach.
  • Galvanized remains in the slab or at fixture connections.
  • The invoice does not say what was left behind, so the inspector cannot tell.

Our rule of thumb: if the goal is insurance, remove every foot of the problem material in the supply system, including the short sections at water heaters, toilets and sinks. Ask your agent before signing for any partial scope. For pricing factors on a full job, see repipe cost factors in Cape Coral.

Timing a repipe around a home purchase

Buyers usually learn about polybutylene or galvanized during the inspection period, which leaves little time. A lender will want insurance in place before closing, so the plumbing question has to be answered before the closing date, not after. Common paths, which you should review with your agent, your attorney or title company, and your lender:

  • Seller repipes before closing. The cleanest result for underwriting, since the new 4-point can show the work. Ask for the permit, final and invoice in writing.
  • Credit or price reduction. The buyer handles the repipe after closing. This only works if a carrier will write the house as it stands, often with an exclusion, and allows time to fix it.
  • Carrier condition with a deadline. Some carriers bind coverage and require repairs within a set period. Get the deadline and the proof required in writing.
  • Extend or renegotiate. If no carrier will bind, closing may need to move.

Scheduling matters. A repipe needs a permit, access to walls and ceilings, inspections and drywall repair afterward. Building department timelines vary by city and county, so call early. Our older home buying guide covers what else to check during the inspection period, and agents can use our real estate agent plumbing page to coordinate.

Cast iron drains: lining vs replacement and how insurers view each

Cast iron was a standard drain material before plastic drain pipe took over, so many older Southwest Florida homes still have it under the slab. The current 4-point form asks for the drain system age and lists cast iron as a pipe type, so this now shows up on paperwork that once ignored it. Background on how cast iron fails here is on our cast iron drain failure page.

The two options

  • Replacement swaps cast iron for PVC. Under-slab runs mean cutting the slab or tunneling. The result is new pipe that any inspector can identify.
  • Lining installs a resin liner inside the existing pipe. The Florida Building Code points cured-in-place pipe rehabilitation to ASTM F1216 or F1743. A 2024 Building Commission staff analysis said other methods, such as some spot or coating systems, are alternatives that need local building official approval.

What insurers tend to think

We found no single published Florida rule on lined cast iron. Insurers and their engineers have argued in claims cases that a liner can create a sealed system at lower cost than tear-out, which suggests some carriers see lining as a real fix. Others look at what the 4-point records, and a lined pipe is still cast iron on the outside. Before choosing, ask your agent whether the carrier you want accepts lined cast iron, and what proof it wants. A sewer camera inspection before and after the work gives you video to back up whichever path you take.

Water heater age rules

The water heater is the plumbing item most likely to fail an insurance review in a house with otherwise good pipes. The form asks for its age, year installed, location and relief valve. Patterns from carrier guides:

  • Many guides cap interior water heaters at about 15 years. Some are stricter; ask your agent for the carrier’s number.
  • Location matters. A heater in a garage may be treated differently from one in a hall closet over finished floors.
  • The temperature and pressure relief valve must be present, and its discharge line should run to an approved location. Citizens has flagged unpiped valves on interior heaters.
  • Any sign of a current or past leak, corrosion at the connections, or rust at the base can make the condition unsatisfactory even if the heater is young.

If the label is missing or faded, the serial number usually encodes the manufacture date, and an inspector can look it up. If the heater is near the limit, replacing it at the same time as a repipe means one permit cycle, one set of photos and one updated 4-point. See water heater service for options.

Checklist: getting from a failed 4-point to an insurable house

Work through these in order. Skipping steps is how people end up paying for a repipe that still does not satisfy the carrier.

  • Get a copy of the 4-point and read the plumbing page yourself. Note every pipe type checked and every unsatisfactory item.
  • Call your agent and ask exactly what the carrier needs: material removed, heater age, drain condition, and the proof required.
  • Ask whether the carrier accepts partial repipes and lined cast iron, and get the answer in writing if you can.
  • Have a plumber confirm what is actually in the walls, attic and slab. Visible piping at the heater does not always match hidden runs.
  • Agree on a written scope that names every material being removed and installed.
  • Confirm the permit is pulled before work starts.
  • Photograph the old piping before it is removed.
  • Pass the final inspection and keep the final in your records.
  • Collect the invoice listing materials and scope.
  • Order a new 4-point dated after the final, and send it to your agent with the permit and invoice.

Local notes for Lee, Collier, Charlotte and Sarasota County homes

Repiping is permitted plumbing work. In unincorporated Lee County, contractors apply through the county’s online system, and the plumbing inspection sequence includes rough, second and final inspections. Cities such as Cape Coral, Fort Myers, Bonita Springs, Naples, Punta Gorda, North Port and Venice run their own building departments with their own scheduling, so timelines differ by address.

Housing age shapes what we find. Homes built from about 1978 through the mid 1990s are the main window for polybutylene, which matches the dates covered by the national polybutylene class action settlement for installations between January 1978 and July 1995. Older homes, built before plastic piping became common, are the ones more likely to have galvanized supply lines and cast iron drains. Either way, homes in these areas are often past the 20-year line that triggers a Citizens 4-point.

We work across Lee, Charlotte and Collier Counties, plus North Port, Venice and LaBelle. Check our service areas for your town.

When you are ready to schedule, contact us or call (239) 518-4198, Monday to Friday, 8am to 5pm. If you are still weighing materials, our PEX vs copper comparison covers that choice, and polybutylene replacement covers the job itself.

En español: cambio de tuberías para el seguro

Si su inspección de 4 puntos muestra tuberías de polibutileno o acero galvanizado, muchas aseguradoras en Florida no aceptarán la póliza o pondrán una exclusión por daños de agua. Antes de hacer cualquier trabajo, hable con su agente de seguros para saber exactamente qué pide la compañía. Guarde el permiso, la inspección final, la factura con los materiales y fotos, y pida una nueva inspección de 4 puntos después del trabajo. Nuestro personal habla inglés, español y portugués. Llame al (239) 518-4198.

Common Questions

Will my insurer accept a home with polybutylene pipes in Florida?

Many will not. Citizens does not insure new business on homes over 20 years old with polybutylene, and some private carriers decline it or require a water damage exclusion. Ask your agent which carriers will write your house as it stands.

Does a partial repipe satisfy insurance?

Sometimes. The 4-point form has a partially re-piped option, but if any polybutylene or galvanized remains, the inspector should still list it. If the goal is insurance, plan to remove all of the problem material and confirm with your agent first.

How old can my water heater be?

It depends on the carrier. Several underwriting guides we reviewed cap interior water heaters at about 15 years. Your agent can tell you the limit for the carrier you are applying with.

Is a lined cast iron drain treated the same as a replaced one?

Not always. Some carriers accept lining with documentation and others focus on the pipe material recorded on the form. Ask your agent before choosing, and keep camera video of the drain before and after the work.

What paperwork should I give my agent after a repipe?

The permit number and passed final, an invoice that lists the materials and scope, before and after photos, water heater details, and a new 4-point dated after the work.

Is there a Florida law that limits plumbing age rules like the roof rule?

We did not find one. Florida’s 15-year roof protection in section 627.7011 addresses roofs only. Plumbing rules come from each carrier’s underwriting guidelines. Confirm current rules with your agent.

Can I close on a house before the repipe is done?

Possibly, if a carrier will bind coverage that your lender accepts. That may mean an exclusion or a repair deadline. Work it out with your agent, lender and closing agent before the inspection period ends.

How long is a 4-point inspection good for?

Each insurer sets its own window. Citizens has used 12 months for condition reports, and the state consumer advocate notes many carriers expect reports dated within 30 days of the application. Ask your agent.

Why HomeFlow

  • One company for service calls, remodels and new construction, so you’re not lining up a different plumber for each job.
  • We work in Lee, Charlotte and Collier Counties and know the pipe, water and slab issues that come with homes here.
  • Call (239) 518-4198 or send a request online. Tell us what’s going on and where, and we’ll take it from there.

Need a plumber?

Call (239) 518-4198 or send us a request and we’ll get back to you.

Scroll to Top